What Are the Key Points for Shipping and Customs Clearance of a Used Drilling Rig Abroad?

Shipping a used rotary rig abroad turns on disassembly, the right container, lashing, export declaration and destination clearance. Most rotary rigs fit a 40HQ after the mast and kelly are broken down; indicative Shanghai-to-Africa sea freight runs USD 3,000–6,000 per 40HQ, plus destination duty and VAT.

How Do You Disassemble and Pack a Rig for a 40HQ?

  • Mast: lower and section it; pad the joints to avoid weld damage.
  • Kelly bar: pull and secure in a cradle; protect the splines.
  • Buckets / augers: stack and brace so they cannot shift.
  • Power unit: drain fluids per carrier rules; secure the cab.
  • Lashing: use certified lashing points and a signed lashing plan.
  • Photos: record load and seal numbers for the destination inspection.

What Documents and Customs Steps Are Involved?

Export side (seller): proforma invoice → packing list → export declaration at Shanghai → Bill of Lading. Import side (buyer): present commercial invoice, packing list, BL and any certificate of origin to the destination customs; pay duty and VAT; arrange clearance. The seller provides honest condition reports and export papers; we do not promise "包清关 / 包税".

How Much Does It Cost and How Long?

Route (example) Container Indicative freight Transit
Shanghai → Lagos, Nigeria 40HQ US$ 4,500–6,000 35–45 days
Shanghai → Mombasa, Kenya 40HQ US$ 3,800–5,200 28–38 days
Shanghai → Jakarta, Indonesia 40HQ US$ 1,800–2,800 10–16 days

Freight is an indicative Q4 2026 quotation; firm rates are confirmed at booking. Destination duty and VAT are the buyer's scope and vary by country.

Pre-Shipment Checklist

  • Confirm the rig breaks down to fit a 40HQ (mast + kelly length).
  • Get a written lashing plan and certified lashing points.
  • Prepare proforma invoice, packing list and export declaration.
  • Agree Incoterms (FOB Shanghai is standard for us).
  • Confirm destination port, duty rate and clearance agent.
  • Photograph the loaded container and record the seal number.

How We Handle Export Documents

We prepare the export declaration, packing list and commercial invoice, and we supply the inspection video and spec-plate photos for the buyer's clearance file. Import duty, VAT and clearance at the destination port remain the buyer's responsibility; as an example, Nigeria applies import duty and the SONCAP programme through the Standards Organisation of Nigeria.

Which Rigs We Recommend for Export (3–5 Units)

The rotary rigs below are container-friendly after disassembly and in stock for export. Prices are indicative EXW China. Live units and firm quotes: FairTradeMachinery rig inventory.

Model Max depth / dia. Packing Year / hours Indicative price (EXW)
XCMG XR280D 80 m / 2.5 m 40HQ 2019 / 3,600 h US$ 118,000–145,000
SANY SR285 85 m / 2.5 m 40HQ 2020 / 3,100 h US$ 120,000–150,000
Zoomlion ZR220A 70 m / 2.0 m 40HQ 2018 / 4,100 h US$ 86,000–108,000
Sunward SWDM280 85 m / 2.5 m 40HQ 2019 / 3,500 h US$ 110,000–138,000

FAQ

Will the rig fit a 40HQ?

Yes — the mast and kelly disassemble for a 40HQ; we send the lashing plan.

Who pays the freight?

Under our standard FOB Shanghai terms, freight and destination clearance are the buyer's scope.

How long to Africa?

About 35–45 days to West Africa, 28–38 days to East Africa, plus clearance.

Do you handle destination clearance?

We provide export documents and condition reports; import clearance, duty and VAT are the buyer's responsibility.

Can I get a firm freight quote?

Freight is confirmed at booking; indicative Q4 2026 rates are in the table above.

Sources

  • Nigeria Customs Service — import procedures and Form M / PAAR: https://www.customs.gov.ng
  • Standards Organisation of Nigeria (SON) — SONCAP programme: https://www.son.gov.ng
  • FairTradeMachinery — used drill rig inventory (live models & specs): /rigs.html Published: 2026-11-18· Last reviewed: 2026-11-18 · 
  • By Author: 【Pace 】Equipment Inspector, FairTradeMachinery

FairTradeMachinery

أنت تصمم الرؤية. نحن نتعامل مع الأجزاء الصعبة.

مساعدة المشترين العالميين على الوصول إلى آلات وحلول ما بعد البيع ذات قيمة أفضل.

بصفتنا منصة تبادل الآلات المستعملة الرائدة في الصين ، نحن نقع عند تقاطع تقنية إنترنت الأشياء والتجارة B2B. هذا يعني بيانات المخزون في الوقت الفعلي ، وملفات البائعين المعتمدين ، وعملية معاملات مصممة للمشترين عبر الحدود الذين لا يمكنهم دائمًا فحص الآلات شخصيًا. تجاوز مستخدمونا في الصين 1.5 مليون مما يعني أن لدينا المصدر الأول لأصحاب الحفارات والعدد المكافئ من الآلات. هذا يعني أننا يمكننا تغطية جميع الموديلات الشائعة وحتى الاحتياجات المحددة ، بغض النظر عن الحالة.

facebookyoutubeinstagramtiktoklinkedinreddit
الأسئلة الشائعةFAQsWhatsAppWhatsApp